Each DLP system consists of a High-Grade Stainless-Steel Direct valve with integrated pressure gauge adaptor with Schrader valve on the valve body to monitor cylinder pressure, and a quarter turn isolation valve to interface with the AutoFireX® Fire Detection Tubing., and a PRD (Pressure Relief Device) tested up to 44Bar is also provided. The systems is supplied complete with CE Cylinders and Brackets Stainless steel siphon tube with appropriate agents, as required.
To assist in annunciation, an optional pressure switch provided, can be installed at one of the ports on valve or at the end of the detection line using End of Line Adaptor, also available with the system. The pressure switch provides a potential free contact, that can be interfaced, with existing FACP (Fire Alarm Control Panel) to indicate system discharge, shutdown ventilation, shut-off electrical power, as may be required. Alternatively, it can also be connected to a Audio Visual (A/V) alarm unit for annunciation.
Technical Specification
| System Information | Performance Information | |||
|---|---|---|---|---|
| PRODUCT CODE | AGENT QTY. | CYLINDER VOLUME | OPERATING PRESSURE(@21oC) | MAX VOLUME COVERAGE* |
| 4000101 | 1 kg | 1400 ml | 15 Bar | 1m3 |
| 4000102 | 2 kg | 2218 ml | 15 Bar | 2m3 |
| 4000105 | 5 kg | 5000 ml | 15 Bar | 5m3 |
| 4000110 | 9 kg | 11000 ml | 15 Bar | 9m3 |
*Figures based on ideal conditions in fully enclosed space. Actual figures may vary according to application.
Maximum volume coverage is determined by agent concentration discharged within the enclosure where the fire hazard is located. The discharge time for DLP system utilising various agents differ from agent to agent and capacity of the cylinder.